Indo Danish Tool Room (IDTR), Jamshedpur

Introduction

Indo Danish Tool Room, formerly known as Central Tool Room & Training Centre, Jamshedpur, has been set up by DC(MSME) to meet the growing need of toolings in India and to assist SSI units. This Tool Room has been set up in the year 1991 with the assistance of Government of Denmark and the infrastructure facilities have been provided by the State Government of Bihar. The total investment in the Tool Room is around Rs 52.00 crores.

Objectives of the Tool Room

(i) To assist SSI units in technological upgradation by providing quality toolings.

(ii) To increase efficiency of SSI units by providing consultancy and common service facilities in the areas of design and production of tools, jigs and fixtures, moulds & dies etc.

(iii) To design and manufacture precision tools such as Press Tools, moulds and dies for metal castings, jigs and fixtures and special purpose tools.

(iv) To conduct long term training courses in tool and die making, machining and fitting and short term courses on related subjects to personnel working in the industries.

Management

The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India. DC(SSI) is the President of this Society and Chairman of their Governing Council. Adequate representation to State Government, donor country and industry associations has been provided in the constitution of governing council.

Specific capabilities of Tool Room

The Tool Room is equipped with latest state of the art machinery and equipment and is providing comprehensive and integrated services in Tool Engineering. It has high-tech capabilities in tool production, tool design and heat treatment besides providing consultancy services in the field of tool engineering and innovation for improved quality and productivity. The IDTR has focused towards the growth of Indian industries and is thus committed to undertaking product design and prototype development. The consistent high quality and precision orientaion has been the main strength to the general engineering industry whether it requires quality moulds, dies and tools or precision components.

Some of the high-tech machines installed at the Tool Room are Agiecut CNC Wire EDM, CNC Jig Grinder, Agietron CNC EDM, Mikron CNC High Speed Milling (for electrode making), Studer Precision Cyl. Grinding Machine, Schaublin High Precision Turning, Mazak CNC Turning Lathe, CNC Docket Machining Centre, Jungner Tool & Cutter Grinder, Jakobsen Grinding Machine, ZEISS CNC 3D Coordinate Measuring Machine, ALD Vacuum Heat Treatment Furnace and Demang Injection Moulding Machine (Micro Processor Controlled), CAD/CAM Equipment with Silicon Graphic Work Stations, Hydraulic Press, etc.

Training facilities and service available

IDTR, Jamshedpur is equipped for comprehensive and integrated service in Tool Engineering, state of the art leading edge technology in CNC, CAD/CAM, Precision Engineering, modern teaching aids, technological support & consultancy where mission is high degree precision & quality and steadily updating design & development which will excel at every level.

Well structured, modular, practically oriented 4 years Diploma in Tool & Die making training programmes with intake capacity of 40 are another focus area of IDTR. This course has been approved by AICTE, Govt. of India, recognised by State Board of Technical Education. This course has also been recognised by Institute of Engineers (India), and the passed out candidates are exempted from Studentship Examination of the institution. The target group for this training programme is candidates who have passed HSC/SSC or equivalent examination from a recognised University or Board with Mathematics and Science (Physics or Chemistry or both) with minimum 50% marks (40% in case of candidate belonging to SC/ST in aggregate).

Commencement period & fee for 4 Year Diploma Course

Session for 4 Year Diploma in Tool and Die Making Course commence in September/October every year. Details of admission dates are published in newspapers and the selection of candidate is made on the basis of merit through written test. Prospectus can be had from the Tool Room. Fee for this course is Rs 9000/- per annum. Fee structure is subject to change and terms and conditions apply. The intake of candidates p.a. is 48.

Short Term Training Courses

Having realised the need to update the skills of the technical personnel in the industry, IDTR has launched numerous short-term courses - both regular and tailor made ones - to meet the specific needs of the industry. All these courses are regularly upgraded to keep abreast of the global technological advancements. The equipment installed in the Training Centre range from the conventional to the state of the art. In close consultation with the industry, IDTR shall continue the thrust to develop specific tailor-made courses.

Some of the short-term training courses being conducted by the Tool Room are as follows:-

Sl. No

 

Name of the Course

  

Duration

 

Fees(Rs)

 

Intake

 

Intake Level

 

1.

  

CNC Programming & operation

  

3 months

  

21000/-

  

08

  

BE/ Diploma/ NCTVT/ B.Sc
 

2.

  

Auto Cad

 

3 weeks

  

4000/-

  

08

  

BE/ Diploma/ NCTVT/ B.Sc.
 

3.

  

Advanced Auto Cad

  

3 weeks

  

4000/-

  

08

  

BE/ Diploma/ NCTVT/ B.Sc
 

4.

  

CNC Turing

  

3 weeks

  

4000/-

  

08

  

BE/ Diploma/ NCTVT/ B.Sc
 

5.

  

CNC Milling

  

3 weeks

  

4000/-

  

08

  

BE/ Diploma/ NCTVT/ B.Sc
 

6.

  

CNC Wire Cut

  

1 week

  

5000/-

  

04

  

BE/ Diploma/ NCTVT/B.Sc
 

7.

  

Precision Machining

  

6 weeks

  

8000/-

  

10

  

Diploma/ NCTVT
 

8.

  

Press Tool Design

 

1 week

 

4000/-

 

08

  

BE/ Diploma
 

9.

  

Design of Die Casting

  

1 week

  

4000/-

  

08

  

BE/ Diploma
 

10.

  

Design of Plastic Mould

  

1 week

 

5000/-

  

04

  

BE/ Diploma
 

11.

 

Design of Jigs & Fixtures

  

2 weeks

  

4000/-

  

10

  

BE/ Diploma
 

12.

  

I-Deas

  

6 weeks

  

15000/-

  

10

  

BE/ Diploma

Note:-

  1. Industry based short term training courses in tool engineering can be designed as per the specific requirements.
  2. Course fee/duration/intake are subject to change.
  3. The training calendar for the year 2001-02 is also available.

Accommodation available for Trainees

Limited hostel facilities are available for participants of short-term training courses. Additional hostel facilities would be available shortly.

For further details, please contact:

Shri S. Kasi
(General Manager)

Address:

MSME-Tool Room
(Indo Danish Tool Room)
M-4 (Part), Phase VI, Tata Kandra Road
P.O.- Gamaharia
Jamshedpur - 832 108
Telephone: 0657 - 2408061
Fax No.: 0657 - 2407723
E-mail: jsr_idtr@sancharnet.in
URL: www.idtrjamshedpur.com


Traning Calender

Latest News:

TOOL ROOM & TRAINING CENTRE, PATNA

A Tool Room & Training Centre at Patna as an Extension Centre of Indo Danish Tool Room, Jamshepdur is being set up with an objective to provide various long term and short- term trainings to the young persons of the area in Tool & Die Making involving Hi-tech hardware and software. The project will be jointly implemented by IDTR Jamshedpur and SISI Patna.

In the initial phase it is proposed to conduct 4 year Diploma in Tool & Die Making, 2 years Certificate Course in Tool Room Machinist, 6 months Certificate Course in Tool Design and various short term courses in the areas of CAD/CAM and CNC Machining Technology.

Related Links:

Autonomous Bodies under DC(MSME)