Central Tool Room & Training Centre (CTTC), Kolkata
Introduction
Central Tool Room & Training Centre (CTTC), Calcutta has been set up in the year 1977-78 by DC(MSME) to meet the growing need of toolings in India and to assist SSI units. This Tool Room has been set up with the assistance of Government of Denmark and the land has been provided by the State Government of West Bengal. The total investment in the Tool Room is around Rs.20.00 crores.
Objectives of the Tool Room
Management
The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India, DC (SSI) is the President of this Society and Chairman of their Governing Council. Adequate representation to State Government, donor country and Industry Associations has been provided in the constitution of Governing Council.
Specific capabilities
The Tool Room is equipped with latest state of the art imported and indigenous machinery and equipment and is providing comprehensive and integrated services in the Tool Engineering. It has high-tech capabilities in tool production, tool design and heat treatment besides providing consultancy services in the field of tool engineering and innovation for improved quality and productivity. The CTTC has focused towards the growth of Indian industries and is thus committed to undertaking product design and prototype development. The consistent high quality and precision orientation has been the main strength to the general engineering industry whether it requires quality moulds, dies and tools or precision components.
Some of the high-tech machines installed at the Tool Room are CNC 5 axis Machining Centre, Rapid Prototyping Equipment, CNC Lathe, CNC Milling Machines, CNC Jig Boring Machine, CNC EDM Machines, CNC Wire Cut Machine, CNC Coordinate Measuring Machine, Computer Aided Design Section and Vacuum Heat Treatment Furnace etc. Sophisticated Management Information System including Computers, Networking & Peripherals has also been installed in the Centre for its better functioning.
Training facilities and services available :
CTTC, Calcutta is equipped for comprehensive and integrated service in Tool Engineering, state of the art leading edge technology in CNC, CAD/CAM, Precision Engineering, modern teaching aids, technological support & consultancy where mission is high degree precision & quality and steadily updating design & development which will excel at every level.
Well structured, modular, practically oriented 4 year Diploma training programme in Tool & Die Making with intake capacity of 40 is another focus area of CTTC. This Course in Tool & Die Making is approved by AICTE, Government of India and recognised by State Council for Engineering and Technical Education, West Bengal as equivalent to Diploma in Mechanical Engineering for job purposes. It has also been recognised by Government of Rajasthan, Technical Education Department for employment to the posts under the State Government where Diploma in Mechanical Engineering in the field of Tool & Die Making is the prescribed qualification. Institution of Engineers (India) has recognised this course as exempting from studentship examination. The target group for this training programme is candidates, who have passed Matriculation or equivalent examination from a recognised University or board with Mathematics and Science (Physics or Chemistry or both) with minimum 50% marks (40% in case of candidates belonging to SC/ST in aggregate).
Commencement period and fee for 4 Year Diploma Course
Session for 4 Year Diploma in Tool and Die Making Course commence in September/October every year. Details of admission dates are published in newspapers and the selection of candidates is made on the basis of merit through written test. Prospectus can be had from the Tool Room. Course fee for this course is Rs. 500/- p.m. Fee structure is subject to change and terms and conditions apply.
Accommodation available for trainees :
Hostel facilities are available for 98 participants.
Short Term Training Courses
Having realised the need to update the skills of the technical personnel in the industry. CTTC has launched numerous short-term courses - both regular and tailor made ones - to meet the specific needs of the industry. All these courses are regularly upgraded to keep abreast of the global technological advancements. The equipment installed in the Training Centre range from the conventional to the state of the art. In close consultation with the industry, the CTTC shall continue the thrust to develop specific tailor-made courses.
Some of the short-term training courses being conducted by the Tool Room are as follows:-
|
S. No. |
Name of the Course |
Duration |
Fees |
Intake |
Intake level |
|
1 |
CNC Milling |
2 weeks |
3500/- |
10 |
M/c Operators & Supervisors |
|
2 |
Auto-CAD; Level I |
2 weeks |
3500/- |
8 |
Draftsmen/Tool Designers |
|
3 |
Auto-Cad; Level II |
2 weeks |
3500/- |
8 |
Design Engineers |
|
4 |
Vacuum Heat Treatment |
1 weeks |
3500/- |
8 |
Heat Treaters & their Supervisors |
|
5 |
CNC Turning |
2 weeks |
3500/- |
10 |
Late Operators & Supervisors |
|
6 |
Auto-Cad; Level-I |
2 weeks |
3500/- |
8 |
Draftsmen/Tool Designers |
|
7 |
Auto-Cad; Level-II |
2 weeks |
3500/- |
8 |
Design Engineers |
|
8 |
CNC Milling |
2 weeks |
3500/- |
8 |
M/c. Operators & Supervisors |
|
9 |
CNC WEDM |
2 weeks |
3500/- |
10 |
WEDM Operators & Supervisors |
|
10 |
CNC Turning |
2 weeks |
3500/- |
8 |
Lathe Operators & Supervisors |
|
11 |
Auto-Cad; Level I |
2 weeks |
3500/- |
8 |
Draftsmen & Tool Designers |
|
12 |
Auto-Cad; Level II |
2 weeks |
3500/- |
8 |
Design Engineers |
Note:
For further details, please contact:
Shri M.Karuppasamy
(General Manager)
Address:
MSME-Tool Room
(Central Tool Room & Training Center)
Bonhooghly Industrial Area,
Kolkata - 700108 (W.B.)
Telephone: 033-25771068, 25771492
Fax No.: 033-25772494
E-mail: cttc@cal.vsnl.net.in,ctc@cal.vsnl.net.in
Gram: CENTOTRACE
Website: business.vsnl.com/ctckolkata